Authored by F Sakellariadou*,
Abstract
The 21st century faces a high need for resources and specifically critical metals. As terrestrial mineral deposits are depleted, the exploration of marine resources seems to be a promising solution. Significant metal abundances are found in the deep seabed and particularly in polymetallic nodules, cobalt-rich ferromanganese crusts and seafloor massive sulphides. However, deep-sea mining causes many environmental impacts and deep-sea ecosystems are less understood as well as difficult to monitor. The adoption of a circular economy and the rejection of the throwaway attitude will help managing finite resources while meeting the needs of a growing world population with lower risks to humankind and the environment.
Opinion
The world’s population, today numbering more than 7.8 billion people, is projected to increase to 8.5 billion in 2030 and peak at 11.2 billion by 2100. The world economy is expected to grow at an annual average rate of around 2.6% between 2016 and 2050. The growing population, the increase in GDP levels and the consumption patterns of modern society lead to a higher need for resources. The global ocean covers approximately the 71% of our planet’s surface. It has an enormous importance due its economic values and the wide range of ecosystem services. Nowadays, it is well acknowledged that the Ocean and its resources are vital for tackling the several challenges that the Earth faces in the decades ahead. The depletion of terrestrial mineral deposits and the continuous rise of the demand for critical metals, arouse the interest for the exploration of marine mineral resources. Seabed mining is an emerging industry of the blue economy. Advances in deep-sea technology make seabed mining commercially viable. Critical metals [1] are crucial for emerging green and artificial intelligence technologies and achieving the targets of sustainable development. Metals, like manganese, iron, cobalt, copper, nickel, zinc, lithium, titanium, tellurium and the rare earth elements (REE), are hosted in various seabed resources [2]. Metal mineral resources are deep-sea polymetallic nodules, cobalt-rich ferromanganese crusts, seafloor massive sulphides, marine phosphorites, REY -rich muds, as well as placer deposits [3-9]. Significant abundances of nodules occur in four abyssal areas, the Clarion-Clipperton Zone in the Pacific Ocean, the Peru Basin in the Eastern Pacific Ocean, the Penrhyn basin very near the Cook Islands in the South Pacific Ocean, and the central Indian Ocean, at water depth ranging from 3,500 to 6,500m. Polymetallic nodules consist mainly of manganese, iron, copper, nickel and cobalt along with other interest elements like zinc, lithium, molybdenum, titanium and rare earth elements plus yttrium (REY). Up to 19% of the known polymetallic nodules are in Exclusive Economic Zones [10]. Cobalt rich ferromanganese crusts with a high mining potential are found mainly in water depths from 800 to 2,500 m, especially in the Central Pacific Ocean called the “Prime Fe-Mn Crust Zone (PCZ). Additional exploration areas are the NE Atlantic margin and the Indian Ocean [2,11,12]. Ferromanganese crusts have a high enrichment in cobalt, tellurium, nickel, molybdenum and REY. Up to 54% of the known crust are in Economic Exclusive Zones [10]. Seafloor massive sulphides (SMS) are formed on hydrothermal sites, along mid-ocean ridges, and especially on the East Pacific Rise, the Southern East Pacific Rise, the North Pacific Rise and the Mid-Atlantic Ridge. Seafloor massive sulphides are found at depths varying from 1,500 to 3,500 m. Areas with a particular interest for SMS mining are the deposits in the Exclusive Economic Zones (EEZ) of Papua New Guinea (in the South Western Pacific Ocean) and New Zealand [13]. Up to 42% of the known polymetallic sulphides are in Exclusive Economic Zones [10]. Marine phosphorites are found in lagoons, insular areas, continental margins and seamounts [14]. They are mainly explored for phosphorus and manganese with co- products and by-products REY, cobalt, nickel, tellurium, and niobium. The marine zones with a high potential for marine phosphorites exploration are the Clatham Rise off New Zealand, the area offshore the state of Baja California and the area on the shelf off Namibia. REY-rich deep-sea muds are found in the eastern-South Pacific and the North Pacific Ocean [3] as well as in the western North Pacific Ocean near Minamitorishima Island [15]. Placer deposits of heavy and weathering resistant minerals are found in various locations on continental shelves. In some cases, their location mark ancient coastline. Coastal minerals are ilmenite, sillimanite, garnet, zircon, monazite, rutile, titanite, allanite, uraninite, xenotime and apatite. Monazite and sometimes xenotime are the REE-bearing minerals in placer deposits [16,17]. Both of them are radioactive as they contain thorium and, less commonly, uranium.
Comparing seabed mining with land-based mineral extraction, we find out that each seabed site with high mining potential shows a metal enrichment in more than one metal. This is an important advantage. Additionally, as marine mineral deposits are mainly exposed on the seabed, the mining process produces smaller quantities of waste rocks. Mining of the deep seabed does not require permanent mining structure [18]. It takes place via dredging or cutting processes and transport of the material to a support vessel at sea surface. After a minimal handling of the mineral-bearing material onboard, it is transferred to a second and smaller vessel that transports it to shore. Wastewaters and sediment material are returned to the ocean. Deep-sea mining activities, as any kind of human development, cause significant negative impacts to the marine environment and the bio-communities. The deepsea floor (below 200 m) covers more than 87% of the ocean floor and it is regarded as one of the least well-understood ecosystems. Deep-sea is inhabited by as estimated 10 million species that have slow dynamics, high sensitivity to anthropogenic disturbances and significant environmental stability [19]. Moreover, benthic organisms contain the largest number of undiscovered species. Deep-sea is regarded as an exceptionally vulnerable area with a very high ecological value. We now know that the conservation of deep-sea biodiversity is crucial for the sustainable functioning of the global ocean. In general, the environmental impacts of deepsea mining could be detected at the seabed, the seawater column as well as the atmosphere. Among them, the most important are habitat alteration, sediment disturbance, plume discharges, toxic compounds release, light and noise generation and air emissions. In agreement with the United Nations Convention on the Law of the Sea (UNCLOS), the International Seabed Authority (ISA) regulates deep-sea exploration and mining of the international seabed area (defined as “the seabed and ocean floor and the subsoil thereof, beyond the limits of national jurisdiction” [20]). ISA has entered thirty 15-years contracts for the exploration of three commodities (polymetallic nodules, polymetallic sulphides and cobalt-rich ferromanganese crusts) in the international seabed area, and more particularly in the Clarion-Clipperton Zone, the Indian Ocean, the Mid Atlantic Ridge, the South Atlantic Ocean and the Pacific Ocean. ISA has full responsibility for taking all necessary measures as well as adopting regulations and procedures for the protection and preservation of the marine ecosystem and the elimination of environmental impacts of deep-sea mining.
It should be also noticed that seabed mining might cause problems to existing maritime industries. Therefore, externalities and conflicts with them should be eliminated. The more sustainable use of marine resources and the better management of existing and new maritime activities could be successfully achieved by following the marine spatial planning (MSP) approach. Concluding, the increasing demand for critical metals is an indication of our modern society geared to throw-away consumption. The 21st century will face a crisis in resources. Our challenge is to meet the needs of the global population with the minimum environmental harm. The only way to fulfill this target is to change our lifestyles and apply a circular economy. Taking a critical look at our values and actions and willing to change our behavior we move towards new ideas and approaches such as recycling, repair, reuse, recovery and eco-design. In this manner, the demand for more resources and the pressure put on the environment will be substantially reduced. In any case, the use of the untapped potential of the ocean will require responsible and sustainable approaches.
To read more about this article...Open access Journal of Oceanography & Marine Biology
Please follow the URL to access more information about this article
https://irispublishers.com/aomb/fulltext/metal-demand-and-deep-sea-mining.ID.000541.php
To know more about our Journals...Iris Publishers
To know about Open Access Publishers
No comments:
Post a Comment